{"product_id":"wall-mount-for-starlink-gen-3-heavy-duty-19-inch-adjustable-carbon-steel-j-mount-with-pivot-base-weatherproof-roof-and-wall-mounting-bracket-compatible-with-starlink-standard-4-4x-v3-dish-size-standard-mount","title":"Wall Mount for Starlink Gen 3, Heavy Duty 19 Inch Adjustable Carbon Steel J-Mount with Pivot Base, Weatherproof Roof and Wall Mounting Bracket Compatible with Starlink Standard 4\/4X\/V3 Dish - size: Standard mount","description":"\u003ch3\u003eAbout this item\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eADJUSTABLE PIVOT BASE SET YOUR ANGLE, THEN LOCK IT DOWN :For Starlink Gen 3 has no motor to self-correct, so if your wall isn't perfectly plumb, a fixed bracket means a permanently misaligned dish — the pivot base lets you dial in the exact tilt before you tighten the final bolts.\u003c\/li\u003e\n\u003cli\u003e19-INCH ARM CLEARS YOUR ROOF OVERHANG FOR A CLEAN SKY VIEW :When the dish sits too close to the wall, the eave or fascia cuts into its field of view. Starlink needs roughly a 100° unobstructed cone of sky to track the satellite constellation a few feet of overhang blocking the lower sky is enough to cause signal dropouts. The 19-inch J-arm positions the dish well past most standard roof overhangs, so it has a clear line of sight from wherever you choose to mount it. Designed for Starlink Gen 3 wall and roof installations where dish reach directly affects how reliably the system tracks satellites.\u003c\/li\u003e\n\u003cli\u003eCARBON STEEL BUILD HOLDS RIGID UNDER OUTDOOR LOAD: A 19-inch arm under outdoor load puts real torque on the wall connection point. Carbon steel is a dense, high-tensile material — the arm stays rigid at the bracket joint through wind cycles and temperature changes over the outdoor seasons. The weatherproof coating handles the surface: UV exposure, rain, and freeze-thaw cycles work on bare metal over time, and the coating slows that process down. Once this bracket is on the exterior wall, the material does its job without needing attention.\u003c\/li\u003e\n\u003cli\u003eFITS STARLINK STANDARD 4, STANDARD 4X, AND V3 NO ADAPTER NEEDED This bracket is built to the dimensions of Starlink Standard 4, Standard 4X, and V3 (Gen 3) hardware — the pivot base connects directly to the dish attachment point, no additional adapter required, straight out of the box.\u003c\/li\u003e\n\u003cli\u003eFULL HARDWARE KIT LAG SCREWS, EXPANSION ANCHORS, AND WRENCH INCLUDED:The package includes: J-arm, mount base, support base, lag screws for wood-stud framing, expansion screws and plastic wall anchors for concrete or masonry walls, long stainless steel screws, hex key screws, short screws, and a wrench. For a standard wood-stud or concrete-block exterior wall install, what's in the box covers it — this is a complete mounting kit. Read the instruction sheet before drilling: confirm stud or anchor locations first, then work through the assembly sequence.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOverview\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e ExaktPart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon Stee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem dimensions L x W x H:\u003c\/strong\u003e 6.3 x 3.3 x 17.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Weight:\u003c\/strong\u003e 3.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Brand: ExaktPart","offers":[{"title":"Default Title","offer_id":49129032515655,"sku":"B0GZVKXQJJ-size-standard-mount","price":64.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/4917\/3575\/files\/517jmN2p40L.jpg?v=1791092114","url":"https:\/\/facilityready.us\/products\/wall-mount-for-starlink-gen-3-heavy-duty-19-inch-adjustable-carbon-steel-j-mount-with-pivot-base-weatherproof-roof-and-wall-mounting-bracket-compatible-with-starlink-standard-4-4x-v3-dish-size-standard-mount","provider":"FacilityReady","version":"1.0","type":"link"}